SPECIFICATION SHEET
PM1200TM
Professional Series Two-Way Mobile Radio
250 Channels
Large Channel and Volume Knobs,
On/Off Push Button
Multicolored LED Indicators
Transmit Indicator LED and
Channel Busy Indicator LED
4 Programmable Buttons
Easy access to favorite features. Programmable buttons allow you to assign up to 8 of 21 selectable features
Emergency Microphone
Backlit 8-Character Alphanumeric Display
User friendly icons allow you to easily view status.
Display for viewing of channel names and Caller ID
Internal Speaker
Allows for clear, crisp communication in loud environments
Default Status Check
Blinks orange when volume and channel settings are different than the default settings
Group Select Keys
Changes operating group
Features
Unit-to-unit communication, bypassing the repeater
UÊ Scan
Monitors the scan list channels
UÊ Dual Watch
Channel and priority channel are scanned
UÊ Monitor
Recieve all conventional transmissions overriding receive PL signaling
UÊ Home Channel
Changes the channel to a pre-programmed “home channel”
Additional Features
Send and receive information in a variety of ways:
Quik-Call II™
UÊ Selective Call (Decode)
Receive calls from a specific group or individual
UÊ Call Alert (Decode)
Receive alerts of incoming
calls when a short distance from radio
DTMF Signaling
UÊ Push-to-Talk ID (Encode)
Identify outgoing calls
PM1200
Standard Package
| UÊ ,>` Ê/À> ÃVi ÛiÀ |
|
|
| UÊ *> Ê VÀ « i |
|
|
| UÊ ,i ÌiÊ ÌÀ Ê i>` |
|
| UÊÊ Õ Ì }Ê >À`Ü>ÀiÊÊ |
Ê |
| (for radio and control head) |
|
| UÊÊÓäÊ Ì°Ê* ÜiÀÊ >L i |
|
| UÊÊÓäÊ Ì°Ê,i ÌiÊ Õ ÌÊ >L i |
|
| UÊÊ*À }À> >L iÊ ÕÌÌ Ê >Li à |
|
| UÊÊ1ÃiÀÊ Õ `iÊ |
|
|
| UÊÊÓ 9i>ÀÊ-Ì> `>À`Ê |
>ÀÀ> ÌÞ |
|
To keep things running efficiently, safely, and productively, you need to stay connected.
Keeping communities safe and keeping vital services flowing is a job where there’s no room for error. But today’s budgets don’t always have
room for unlimited spending. So Motorola designed the PM1200™ Professional Series two-way mobile radio to provide government and commercial institutions with maximum value.
The high power, low band PM1200 offers offers local public safety, public works, utilities and trans- portation professionals a full range of easy-to-use features, with all the quality and reliability users expect from Motorola. Count on this dependable performer to provide clear, cost effective com- munication that meets the needs of hard-working professionals.
| SPECIFICATION SHEET |
|
|
| PM1200TM PROFESSIONAL SERIES |
|
| Two-Way Mobile Radio |
|
|
| |
|
GENERAL SPECIFICATIONS |
|
| |
|
Low Band A |
Low Band B |
| Frequency Range |
|
29.7-37 MHz (A) |
37-50 MHz (B) |
| Number of Channels |
|
250 Channels |
250 Channels |
| Channel Bandwith (PLL Steps) |
5/6.25 kHz |
5/6.25 kHz |
| Power Supply Voltage |
|
13.4 V DC ± 15% |
13.4 V DC ± 15% |
| Dimensions (H x W x D) |
|
|
|
| Control Head |
|
3.11 x 7.78 x 3.31 inches (79 x 197.60 x 84.07mm) |
|
| High Power Radio Transceiver |
3.15 x 7.56 x 12.07 inches ( 80 x 192 x 306.50 mm) |
|
| Weight |
|
|
|
| Control Head |
|
1.28 lb (0.58 kg) |
|
| High Power Radio Transceiver |
9.94 lb (4.51 kg) |
|
| Current Consumption |
TX |
22 A |
22 A |
| |
RX |
2.2 A |
2.2 A |
| |
Standby |
0.6 A |
0.6 A |
| Operating Temperature Range |
-22° F to +140° F |
-22° F to +140° F |
| |
|
(-30° C to +60° C) |
(-30° C to +60° C) |
| Frequency Stability |
|
Less than ± 10 ppm |
Less than ± 10 ppm |
| RF Input-Output Impedance |
|
50 |
50 |
| Audio Output Power |
|
10 W @ 4 |
10 W @ 4 |
ENVIRONMENTAL
| Storage Temperature |
-40° to +85° C |
| International Protection |
IP54 Cat. 2* |
| *Control Head Only. |
|
| |
RECEIVER |
| |
Measurements per EIA Standard TIA/EIA-603 |
| |
Low Band A and B |
| Circuit Type |
Double-conversion Super-heterodyne |
| Sensitivity (EIA 12dB SINAD) |
0.35 µV |
| Adjacent Channel Selectivity |
70 dB |
| Intermodulation |
70 dB |
| Spurious and Image Rejection |
60 dB |
| Audio Output |
10 W @ 4 |
| SIGNALLING BOARDS |
| Part Number |
Description |
| HKLN4345 |
PM1200TM Interface Board for Option Boards |
| HKLN4346 |
PM1200TM Quik-CallTM II Decoder Option Board |
| |
|
TRANSMITTER |
| |
|
Measurements per EIA Standard TIA/EIA-603 |
| |
|
Low Band A and B |
| Power Output |
|
120 W / 50 W |
| Maximum Frequency Separation |
5 kHz |
|
| Modulation |
|
16K0F3E |
|
| Conducted Spurious Emissions |
80 dB Below Carrier |
| Audio Distortion (@ 1 kHz) |
< 10% @ 1 kHz |
| Microphone Impedance |
1.6K |
|
| FCC TYPE ACCEPTANCE ID |
|
| TRANSMITTER POWER |
|
|
| Band |
29.7-37 MHz (A) |
|
37-50 MHz (B) |
| Output |
50-120 W |
|
50-120 W |
| Number |
AZ492FT1629 |
|
AZ492FT1630 |
| Model |
AAM32BMD9W5AN |
AAM32CMD9W5AN |
| |
MILITARY STANDARDS 810 C, D, E & F |
|
|
|
|
| |
MIL-STD 810C |
MIL-STD 810D |
MIL-STD 810E |
MIL-STD 810F |
| |
Method |
Proc./Cat. |
Method |
Proc./Cat. |
Method |
Proc./Cat. |
Method |
Proc./Cat. |
| Low Pressure |
500.1 |
I |
500.2 |
II |
500.3 |
II |
500.4 |
II |
| High Temperature Storage |
501.1 |
I |
501.2 |
I/A1 |
501.3 |
I/A1 |
501.4 |
I/Hot |
| High Temperature Operational |
501.1 |
II |
501.2 |
II/A1 |
501.3 |
II/A1 |
501.4 |
II/Hot |
| Low Temperature Storage |
502.1 |
I |
502.2 |
I/C3 |
502.3 |
I/C3 |
502.4 |
I/C3 |
| Low Temperature Operational |
502.1 |
I |
502.2 |
II/C1 |
502.3 |
II/C1 |
502.4 |
II/C1 |
| Temperature Shock |
503.1 |
– |
503.2 |
I/A1-C3 |
503.3 |
I/A1-C3 |
503.4 |
I/Hot-C3 |
| Solar Radiation |
505.1 |
II |
505.2 |
I |
505.3 |
I |
505.4 |
I |
| Rain Blowing* |
506.1 |
I |
506.2 |
I |
506.3 |
I |
506.4 |
I |
| Rain Steady* |
506.1 |
II |
506.2 |
II |
506.3 |
II |
506.4 |
III |
| Humidity |
507.1 |
II |
507.2 |
II |
507.3 |
II |
507.4 |
– |
| Salt Fog |
509.1 |
– |
509.2 |
– |
509.3 |
– |
509.4 |
– |
| Blowing Dust* |
510.1 |
I |
510.2 |
I |
510.3 |
I |
510.4 |
I |
| Blowing Sand* |
|
|
510.2 |
II |
510.3 |
II |
510.4 |
II |
| Vibration Minimum Integrity |
514.2 |
VIII/F, Curve-W |
514.3 |
I/10 |
514.4 |
I/10 |
514.5 |
I/24 |
| Vibration Loose Cargo |
|
|
514.3 |
II/3 |
514.4 |
II/3 |
514.5 |
II/5 |
| Shock Functional |
516.2 |
I |
516.3 |
I |
516.4 |
I |
516.5 |
I |
| Shock Crash Hazard |
516.2 |
III |
516.3 |
V |
516.4 |
V |
516.5 |
V |
| Shock Bench Handling |
516.2 |
V |
516.3 |
VI |
516.4 |
VI |
516.5 |
VI |
*Control Head Only.
Accelerated Life Test
Motorola’s Accelerated Life Test (ALT) is a developmental process of rigorous laboratory testing that simulates years of field use. Motorola has a firm commitment to quality and reliability. These radios have been designed, manufactured and tested to achieve high levels of component and workmanship quality. Motorola radios are designed to minimize costly repairs and downtime.
MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the prop- erty of their registered owners. © Motorola, Inc. 2007.
MD-PM1200SpecSheet